As the second hardtail model in the line, the Thread Two offers the same radical-looking alloy frame with upgraded components for serious shredders, from its Manitou Circus Expert fork to the gravity-proven FSA Gradient cockpit, sealed bearing Haro SD Nylon pedals, Pivotal MTB saddle and alloy seat-post, Spank Spoon rims and the New Haro oversize sealed rotor for fast bar-spin action. The Thread Two offers a unique combination with its custom alloy detangler and a hydraulic-assisted rear brake with the innovative TRP HY/RD disc caliper for high-performance braking while bar-spinning away… Get ready to nail that line like you never have before…
FEATURES
- Haro Thread X6 alloy frame w/ tapered head tube
- 23.3″ TT length w/ 410mm/16.2″ reach
- Custom Haro OS rotor
- Manitou Circus Expert 100mm fork w/ 20mm thru-axle
- Haro Alloy 2-pc crankset, 30T Narrow-Wide sprocket
- FSA Gradient, 25mm rise bar & 1-1/8″ stem
- Haro Pivotal saddle and post
- Spank Ind. Spoon alloy DW 32h rims
- Pivit alloy disc cassette hubs w/14t CrMo cog
- Kenda Small Block Eight 2.35″/2.10″ tires
- TRP HY/RD-C mechanical/hydraulic rear disc brake
Specifications
| FRAME | Haro Full X6 Alloy Thread frame w/ internal head tube, Euro BB shell & ISCG Mount |
|---|---|
| FORK | Manitou Circus Expert, 100mm travel, tapered steerer tube w/ 20mm thru-axle |
| COLORS | Matte Granite |
| WEIGHT | 26.50lbs |
| DRIVETRAIN | |
| CRANKS | Haro Alloy 2-pc, cold-forged, 30t NW chainring |
| PEDALS | Haro SD Nylon w/ sealed bearings |
| CHAIN | KMC Z1, 1/2″ X 1/8″” |
| BOTTOM BRACKET | 4 x Sealed bearing |
| FRONT DERAILLEUR | |
| REAR DERAILLEUR | |
| DERAILLEUR SHIFTER | |
| FREEWHEEL/CASSETTE | 14T Chromoly Cog |
| WHEELS | |
| TIRES | Kenda Small Block 8 26×2.35″ Front & 26″x2.10″ Rear, 60 TPI |
| WHEELS/RIMS | Spank Ind. Spoon alloy double-wall, 32h |
| HUBS | Pivit sealed bearing alloy disc, single-speed cassette w/ 20mm front thru-axle, 32h |
| BRAKING SYSTEM | |
| BRAKES | TRP HY/RD-C 160, Cable / Hydraulic Disc Brake for IS Rear Mount, 160mm disc |
| BRAKE LEVERS | Odyssey Trigger for Single Gyro upper cable |
| OTHER COMPONENTS | |
| GRIPS/TAPE | Velo Lock On |
| HANDLEBAR | FSA Gradient Riser, 25mm Rise, 9 Deg. Backsweep, 6 deg. Upsweep; 31.8mm Clamp |
| STEM | FSA Gradient 1-1/8″, 45mm Ext. |
| HEADSET | FSA # 57, 1-1/8″-1.5″ Alloy, w/ top & lower AC Bearings |
| SADDLE | Haro Pivotal w/ hollow bolt |
| SEAT POST | Pivit Alloy 31.6mm, Pivotal |
| SEAT CLAMP | Pivit Alloy 35mm |
| EXTRAS | Haro OS Teflon Bearing Rotor w/ Upper & Lower rotor cables |
Geometry
| A. Seat Tube (C-T) | 320mm (12.6″) |
| B. Top Tube (Effective) | 593mm (23.3″) |
| C. Head Tube Angle | 68.5° |
| D. Seat Tube Angle | 69° |
| E. Chainstay Length | 390mm (15.4″) |
| F. BB Drop | 15mm (0.6″) |
| G. Wheelbase | 1052mm (41.4″) |
| H. Head Tube Length | 115mm (4.5″) |
| I. Standover | 692mm (27.2″) |
| J. Stack Height | 554mm (21.8″) |
| K. Reach | 410mm (16.1″) |
| L. Fork Height | 478mm (18.8″) |
| M. Fork Offset | 41mm (1.6″) |
| N. Stem Length | 45mm |
| O. Bar Width | 760mm |
| P. Crank Length | 170mm |
