S&M Chris Childs Signature No Exit 9.125" Bars

Product Overview

The S&M Chris Childs Signature No Exit is a 9.125" rise handlebar constructed from 4130 chromoly with 29" width and 11° backsweep. Features a full crossbar for structural rigidity and a narrower width than the Hoder High Bar for technical street riding. Made in the USA.

Key Features

• 9.125" rise height – Tall geometry provides upright positioning for improved leverage and control during technical tricks while remaining slightly lower than 10" bars for riders who prefer more compact handling
• 29" width – Narrower than standard 30" bars for increased clearance through tight street obstacles, gaps, and technical lines while maintaining adequate control leverage
• 11° backsweep angle – Moderate sweep angle rotates grip position rearward to align wrists naturally and reduce joint strain during extended sessions
• 2° upsweep – Increased upward angle compared to minimal-upsweep bars provides additional wrist relief and more natural hand positioning for upright riding postures
• Full 0.75" crossbar – Three-quarter inch diameter brace connects both handlebar legs to distribute impact forces evenly and prevent independent flex or twisting under hard landings
• 4130 chromoly construction – Heat-treated steel alloy provides high tensile strength and fatigue resistance to withstand repeated stress cycles without permanent deformation
• Lighter weight (2.40 lb) – Reduced mass compared to wider or taller bar options while maintaining chromoly strength characteristics
• Made in USA – Domestic manufacturing ensures consistent material quality and weld integrity

Technical Specifications

• Rise: 9.125"
• Width: 29"
• Upsweep: 2°
• Backsweep: 11°
• Crossbar: 0.75"
• Weight: 2.40 lb
• Material: 4130 chromoly

Compatibility and Ideal Use Cases

These bars fit standard BMX stems with 22.2mm (7/8") clamp diameter—verify stem compatibility before ordering. The 29" width is designed for riders who prioritize maneuverability in technical street environments where wider bars might contact walls, rails, or tight transition coping. The 9.125" rise suits riders approximately 5'7" to 6'0" tall, or riders who want tall bar positioning without the full 10" height. Best suited for technical street riding where precise control through narrow gaps and obstacles is prioritized over maximum leverage. The narrower width and specific rise height make these bars ideal for turndowns, barspins, and technical tricks that benefit from compact handlebar dimensions. May feel restrictive for riders accustomed to 30"+ widths or those who prioritize maximum leverage for dirt jumps and large transitions.